Publikationen

Informationssystem der Friedrich-Alexander-Universität Erlangen-Nürnberg

Sammlung/Stundenplan Modulbelegung

Home | Rechtliches | Kontakt | Hilfe

Suche:

Lehr-
veranstaltungen

Personen/
Einrichtungen



	Darstellung
		Druckansicht ausführliche Fassung

Einrichtungen >> Technische Fakultät (TF) >> Department Maschinenbau (MB) >>

Lehrstuhl für Technische Mechanik (LTM, Prof. Steinmann)

	2016 Computational Homogenisation using Reduced-Order Modelling applied to Hyperelasticity Curvature approximation on three-dimensional FE-meshes using the embedded Weingarten map Modelling additive manufactured materials using a crystal plasticity model Molecular statics simulations of ferroelectric nanofilms On cellular mechanisms during cortical folding On structural shape optimization using an embedding domain discretization technique On the Influence of Inhomogeneous Material Properties on Brain Morphogenesis Simulation of Temperature Distribution and Mechanical Material Behavior in the EBM Process Structural shape optimization using a fictitious domain discretization technique
	2015 A global damping factor for a non-invasive form finding algorithm A mechanobiological approach to relate neurodevelopmental processes to brain morphology A multi-scale approach to model the curing process in magneto-sensitive polymeric materials A multi-scale approach to model the curing process in magneto-sensitive polymeric materials A non-invasive geometrical approach to inverse form finding A novel spectral formulation for transversely isotropic magneto-elasticity A staggered approach to shape and topology optimization using the traction method and an evolutionary-type advancing front algorithm A staggered approach to structural shape and topology optimization A staggered approach to structural shape and topology optimization A study on nonlinear electro-elastostatics: Theory and numerical simulation A web-based tool for the interactive visualization of stresses in an infinite plate with an elliptical hole under simple tension: www.ltm.fau.de/plate An atomistic scale analysis of ferroelectric nanodomain interfaces Application of a non-Invasive form finding algorithm to the ring compression test with varying friction coefficients Application of a non-invasive form-finding algorithm to the ring compression test with varying friction coefficients Charakterisierung und Modellierung des quasi-statischen Verhaltens und der Ermüdung eines zellularen Verbundwerkstoffes Computational homogenization of rope-like technical textiles Continuum physics of materials with time dependent properties: Reviewing the case of polymer curing Effect of the cutting condition and the reinforcement phase on the thermal load of the workpiece when dry turning aluminum metal matrix composites Effects of Pressurized Water Reactor Medium on the Fatigue Life of Austenitic Stainless Steels Eight-chain and full-network models and their modified versions for rubber hyperelasticity : A comparative study Experimental Investigations on Environmentally Assisted Fatigue of Ferritic and Austenitic Materials Including Dissimilar Metal Welds Experimental Verification Of A Benchmark Forming Simulation Extrinsic mechanical factors during brain development: In response to Wilfrid Le Gros Clark 1945 Fatigue Approach for Addressing Environmental Effects in Fatigue Usage Calculation Fatigue Strain–Life Behavior of Austenitic Stainless Steels in Pressurized Water Reactor Environments Fatigue Strain–Life Behavior of Austenitic Stainless Steels in Pressurized Water Reactor Environments Fertigungsgenauigkeit beim Drehen steigern - Einfluss der Prozessparameter auf die Maßhaltigkeit bei der Trockenbearbeitung Finite element simulation of the thermomechanical material behaviour in the electron beam melting process for Ti6Al4V Hybrid Continuum Mechanics and Particle-Based Simulations: the Capriccio Method Identification of thermal effects on the diameter deviation of inhomogeneous aluminum metal matrix composite workpieces when dry turning Inverse Materialparameteridentifikation von Blechwerkstoffen für ein anisotropes elasto-plastisches Materialmodell bei finiten Deformationen Investigation of a jointed friction oscillator using the multiharmonic balance method Mechanical properties of gray and white matter brain tissue by indentation Micromechanical Modeling of Textile Materials by Means of 1-D Structural Elements Micromechanics modelling of magneto-sensitive polymeric materials under curing Modelling of iron-filled magneto-active polymers with a dispersed chain-like microstructure Modelling the curing process in magneto-sensitive polymers: Rate-dependence and shrinkage Modelling the mechanical aspects of the curing process of magneto-sensitive elastomeric materials Molecular dynamics and finite elements: an approach to couple different worlds Molecular static simulations of ferroelectric material hysteresis behaviour Molecular statics simulations of ferroelectric barium titanate in the rhombohedral phase Molecular statics simulations of head to head and tail to tail nanodomains of rhombohedral barium titanate Multiscale Simulation of Polymers – Coupling of Continuum Mechanics and Particle-based Modelling Multiscale Simulations of Polymers Multiskalensimulation von Polymeren Nonlinear viscoelastic behavior or measuring artifact? On the wall slip of magneto-sensitive elastomers On curvature control in node-based shape optimization On curvature control in node-based shape optimization On materials with time dependent properties: Application to the continuum mechanics of curing On molecular statics simulations of ferroelectric functional materials On molecular statics simulations of nanodomain interfaces in ferroelectric functional materials On multi-scale models for the curing process in magneto-sensitive polymeric materials On the adaptive finite element analysis of the Kohn-Sham equations: Methods, algorithms, and implementation On the formulation and implementation of geometric and manufacturing constraints in node-based shape optimization On the Modeling and Computation of Electro- and Magneto-Active Polymers Period-doubling and period-tripling in growing bilayered systems Physical biology of human brain development Primary and secondary instabilities affect brain morphology Primary and secondary instabilities in soft bilayered systems Realization of multi-material polymer parts by simultaneous laser beam melting Scale effects in homogenization of metal matrix composites Secondary instabilities modulate cortical complexity in the mammalian brain Size and curvature regulate pattern selection in the mammalian brain Statistical Analysis of Fatigue Data for Austenitic Stainless Steels in Water Environments Statistical Analysis of Fatigue Data for Austenitic Stainless Steels in Water Environments Statistical Models for Estimating Fatigue Lives of Austenitic Stainless Steels in Light Water Reactor Environments Statistical Models for Estimating Fatigue Lives of Austenitic Stainless Steels in Light Water Reactor Environments Structural optimization of shape and topology using an evolutionary-type advancing front algorithm Structural optimization of shape and topology using an evolutionary-type advancing front algorithm The Capriccio Method: An Arlequin-Based Approach to Couple Molecular Dynamics and Finite Element Simulations of Polymers The Capriccio method: coupled molecular dynamics and finite element simulations of polymers The influence of a damping coefficient on a non-invasive strategy for inverse form-finding Thermomechanical simulation of the selective laser melting process for PA12 including volumetric shrinkage Towards modelling the curing process in particle-filled electro-active polymers Towards modelling the curing process in particle-filled electro-active polymers Validierung einer Umformsimulation am Beispiel eines Benchmark-Prozesses
	2014 A comparison between a recursive method based on an inverse mechanical formulation and shape optimization for solving inverse form finding problems A comparison between a recursive method based on an inverse mechanical formulation and shape optimization for solving inverse form finding problems in isotropic elastoplasticity A comprehensive characterization of the electro-mechanically coupled properties of VHB 4910 polymer A comprehensive study on electro-mechanically coupled characterization of VHB 4910 polymer A fast approach to shape optimization by using the inverse FEM A fast approach to shape optimization by using the inverse FEM A mechanical approach to explain cortical folding phenomena in healthy and diseased brains A mechanical approach to explain cortical folding phenomena in healthy and diseased brains A mechanical model predicts morphological abnormalities in the developing human brain A novel strategy to identify the critical conditions for growth-induced instabilities A theory of finite strain magneto-viscoelasticity for magnetorheological elastomers with a directional anisotropy A two-scale simulation method accounting for thermal effects during turning A two-scale simulation method accounting for thermal effects during turning An extended molecular statics algorithm simulating the electromechanical continuum response of ferroelectric materials An integrated approach to shape optimization and mesh adaptivity based on material residual forces Analysis of the machining accuracy when dry turning via experiments and finite element simulations Atomistic to Continuum Coupling: the Promise of Studying Defects at the sub-Micron Scale Bridging scales - from Molecular Mechanics to Continuum Mechanics. Theoretical link, size effects and concurrent coupling strategies Comparison of several staggered atomistic-to-continuum concurrent coupling strategies Comparison of several staggered atomistic-to-continuum concurrent coupling strategies Comparison of several staggered atomistic-to-continuum concurrent coupling strategies Computation of the effective lamination stack's behavior considering the contact simulation with a multi-scale homogenization Computational homogenization of fiber structured materials - Application to ropes Degree of cure-dependent modelling for polymer curing processes at small-strain. Part I: Consistent reformulation Die elasto-plastische Einglättung rauer Oberflächen und ihr Einfluss auf die Reibung in der Umformtechnik Drehen metallischer Verbundwerkstoffe Electro-mechanically coupled properties of VHB 4905 polymers with prestretching: Experiments, modelling and validations Entwicklung einer Kopplung von Molekulardynamik und Finiten Elementen zur Simulation von Nanokompositen Finite element model to calculate the thermal expansion of the tool and the workpiece in dry turning Finite element model to calculate the thermal expansion of the tool and the workpiece in dry turning Finite strain modelling for the curing process in magneto-viscoelasticity Finite strain modelling for the curing process in magneto-viscoelasticity Harmonic Balance Analysis of Bolted Structures in the Frequency Domain Homogenization in periodically heterogeneous elastic bodies with multiple micro-contact Identification of the lamination stack's behavior simulated with a multi-scale homogenization using a progressive contact formulation Identification of the lamination stack's behavior simulated with a multi-scale homogenization using a progressive contact formulation Identifikation mikroskopischer Materialparameter im Rahmen einer Zwei-Skalen-Modellierung Investigation of a Bolted Friction Resonator in the Frequency Domain Investigation of a Bolted Friction Resonator in the Frequency Domain Magnetic force and torque on particles subject to a magnetic field Manufacturing constraints in parameter-free sensitivity-based shape optimization Manufacturing constraints in parameter-free sensitivity-based shape optimization Manufacturing constraints in parameter-free shape optimization Manufacturing constraints in parameter-free shape optimization Mechanical Interphases in Adhesives. Experiment, Modelling and Simulation Microscale modeling and homogenization of rope-like textiles Modeling and simulation of viscous electro-active polymers Modelling of magneto-active polymers with a weak anisotropy Modelling the curing process in viscoelastic magneto-sensitive materials Modelling, simulation and experimental validation of heat transfer in selective laser melting of the polymeric material PA12 Molecular dynamics and finite elements: an approach to couple different worlds Molecular static simulations of domain wall behaviour of ferroelectric barium titanate in the rhombohedral phase Molecular static simulations of ferroelectric material hysteresis behaviour Multiscale simulations of nanocomposites: an approach to couple molecular dynamics and FE Nonlinear magneto-viscoelasticity of transversally isotropic magneto-active polymers Numerical and experimental investigation of a jointed friction oscillator Numerical Continuation Methods for the Concept of Non-linear Normal Modes Numerical Continuation Methods for the Concept of Non-linear Normal Modes Numerical Investigation of Jointed Oscillators using Harmonic Balance Techniques Numerical Investigation of Jointed Oscillators using Harmonic Balance Techniques On a recursive formulation for solving inverse form finding problems in isotropic elastoplasticity On an atomistic scale finite element method for the simulation of ferroelectric functional materials On an atomistic scale finite element method for the simulation of ferroelectric functional materials On characterization of the electro-mechanically coupled properties of VHB polymer On characterization of the electro-mechanically coupled properties of VHB polymers On rate-dependent dissipation effects in electro-elasticity On recursive strategies for inverse form finding in metal forming applications On regularization in parameter-free shape optimization On regularization in parameter-free shape optimization On the Computation of Crack-Driving Forces within the X-FEM On the discrete variant of the traction method in parameter-free shape optimization On the Preparation, Characterisation, Modelling and Simulation of Magneto-Sensitive Elastomers On the Preparation, Characterisation, Modelling and Simulation of Magneto-Sensitive Elastomers On the Preparation, Characterisation, Modelling and Simulation of Magneto-Sensitive Elastomers Optimum blank design by using the inverse FEM in anisotropic elastoplasticity Optimum blank design by using the inverse FEM in orthotropic elastoplasticity Path continuation for the concept of non-linear normal modes using a normal flow algorithm Path continuation for the concept of Non-linear Normal Modes using different corrector algorithms Rate dependent deformations in magneto-rheological elastomers: Modelling and Experiments Reviewing the roots of continuum formulations in molecular systems. Part I: Particle dynamics, statistical physics, mass and linear momentum balance equations Reviewing the roots of continuum formulations in molecular systems. Part II: Energy and angular momentum balance equations Reviewing the roots of continuum formulations in molecular systems. Part III: Stresses, Couple Stresses, Heat Fluxes Simulation of the Arcam MultiBeam Scanning Strategy during Electron Beam Melting of Ti6Al4V Simulation of the temperature distribution in the selective beam melting process for polymer material Simulation of the temperature distribution in the selective beam melting process for polymer material Simulation von Temperaturfeldern und mechanischen Materialverhalten in additiven Fertigungsprozessen Simulation von Temperaturfeldern und mechanischen Materialverhalten in additiven Fertigungsprozessen Size effects in a silica - polystyrene nanocomposite: Molecular dynamics and surface-enhanced continuum approaches The role of mechanics during brain development Thermo-elastic deformations of the workpiece when dry turning aluminum alloys - A finite element model to predict thermal effects in the workpiece Thermomechanical finite element simulations of selective electron beam melting processes: Performance considerations Thermomechanical Simulation of the Electron Beam Melting Process for TiAl6V4 Thermomechanical Simulation of the Electron Beam Melting Process for TiAl6V4 Thermomechanical Simulation of the Selective Laser Melting Process for PA12 including Volumetric Shrinkage Towards a computational model of magneto-sensitive polymers
	2013 A new startegy to solve inverse form finding problems in aniostropic elastoplasticity A new startegy to solve inverse form finding problems in elastoplasticity A theory of finite deformation magneto-viscoelasticity Absicherungskonzept für die Betriebsfestigkeit von Hochvolt-Speicherbatterien für Hybrid- und Elektrofahrzeuge An adaptive finite element method based on sensitivities for node insertion An Arlequin-based method to couple molecular dynamics and finite element simulations of amorphous polymers nanocomposites Atomistic scale finite element method for molecular static simulation of ferroelectric barium titanate Atomistic to continuum staggered coupling scheme applied to interface problems Comparison of different biaxial tests for the inverse identification of sheet steel material parameters. Strain, Status Computational homogenization in magneto-mechanics Computational homogenization of heterogeneous technical textiles Computational modelling and homogenization of technical textiles Degree of Cure-dependent Modelling for Polymer Curing Processes at Small-strains Degree of cure-dependent modelling for polymer curing processes at small-strains Design and validation of a new fixture for the shear testing of cellular solids Development of a contact and a material model of laminated stacks Development of a contact and a material model of laminated stacks Development of a friction law respecting plastic surface smoothing Entwicklung und Untersuchung polytoper Finiter Elemente für die nichtlineare Kontinuumsmechanik Entwicklung und Untersuchung polytoper Finiter Elemente für die nichtlineare Kontinuumsmechanik Finite element simulation of the magneto-mechanical response of a magnetic shape memory alloy sample General imperfect interfaces Geometrically nonlinear higher-gradient elasticity with energetic boundaries Homogenization framework for magnetorheological elastomers Homogenization in periodically heterogeneous elastic bodies with multiple micro contact Homogenization of Composite Materials with Energetic Interfaces Homogenization of heterogeneous, fibre structured materials Homogenization of heterogeneous, fibre structured materials Homogenization of magnetorheological elastomers considering geometrical nonlinearities Homogenization of magnetorheological elastomers considering geometrical nonlinearities Implementierung und Anpassung eines Materialmodells für FE-Simulationen in der Blechmassivumformung Implementierung und Anpassung eines Materialmodells für FE-Simulationen in der Blechmassivumformung. Colloquium on metal forming Investigation of jointed structures using the multiharmonic balance method Investigation of jointed structures using the multiharmonic balance method Investigations on the polygonal finite element method: Constrained adaptive Delaunay tessellation and conformal interpolants Magnetic force and torque on a particle subject to a magnetic field Material modelling and parameter identification for sheet-bulk metal forming Material modelling and parameter identification for sheet-bulk metal forming Material Parameter Identification utilizing Optical Full-Field Strain Measurement and Digital Image Correlation Mathematical modelling of finite strain magneto-viscoelastic deformations Mathematical modelling of finite strain magneto-viscoelastic deformations Micro-to-macro transitions for continua with surface structure at the microscale Modeling deformations of the workpiece and removal of material when turning Modeling deformations of the workpiece and removal of material when turning Modelling the curing process in magneto-sensitive elastomeric materials Modelling the curing process in magneto-sensitive elastomeric materials Molecular dynamics meets finite elements: An approach for coupled simulations of nanocomposites Multiharmonic Balance Analysis of a Bolted Friction Oscillator Multiscale modeling for composites with energetic interfaces at the micro or nanoscale Nonlinear magneto-viscoelastic deformations in magneto-rheological polymers Numerical analysis of the mechanical behavior of lightweight metal-CFRP joints Numerical modelling of thermomechanical solids with highly conductive energetic interfaces On atomistic and continuum modeling: Theoretical link and numerical examples On generalized crystal-plasticity based on defect-densities in a second-order continuum On inverse form finding for orthotropic plasticity On molecular static and surface-enhanced continuum modeling of nano-structures On Molecular Statics Simulation of Ferroelectric Barium Titanate On molecular statics simulation of ferroelectric barium titanate On Some Mixed Variational Principles in Magneto Elastostatics On the failure of silicone breast implants: New insights by mapping the mechanical properties of implant shells On the mechanics of continua with boundary energies and growing surfaces On the modelling of equilibrium twin interfaces in a single-crystalline magnetic shape memory alloy sample. I: Theoretical formulation Phenomenological modelling of self-healing polymers Sheet steel material parameter identification utilizing a biaxial tensile test and opti-cal full-field measurements Sheet steel material parameter identification utilizing a biaxial tensile test and optical full-field measurements Simulation of adhesive joints by viscoelastic interface material model Surface electrostatics - Theory and computations Surface Magnetoelasticity Thermomechanical Finite Element Analysis of the Selective Beam Melting Process Towards a computational model of thermal- and magneto-sensitive polymers Untersuchung nichtlinearer Schwingungs-Systeme mit der Höher-Harmonische-Balance-Methode Versagen von Silikonbrustimplantaten - Neuartige Kartierung und Aufdeckung von Produkt-Clustern Vorstellung eines Simulationsbenchmarks für die Blechmassivumformung
	2012 A Comparison of Atomistic and Enhanced Continuum Approaches at Finite Temperature A Comparison of Atomistic and Enhanced Continuum Approaches for Modelling Surface Effects in Solids A comparison of staggered solution schemes for coupled particle-continuum systems modeled with the Arlequin method A variational approach towards the modeling of the magneto-mechanical responses of a magnetic shape memory alloy sample A variational approach towards the modelling of magnetic field-induced strains in magnetic shape memory alloys Analysis of the lamination stack influence on the stiffness of stator active component Analysis of the lamination stack influence on the stiffness of stator active component Analysis of thermo-mechanical effects on the machining accuracy when turning aluminum alloys Analytical study on the stress-induced phase or variant transformation in slender shape memory alloy samples Applicability of strain measurements on a contra angle handpiece for the determination of alveolar bone quality during dental implant surgery Atomistic and Continuum Modelling of Nano-structures Atomistic to Continuum Modeling of Materials Computational aspects of thermomechanical solids with HC interfaces Computational aspects of thermomechanical solids with Kapitza interfaces Computational Optogenetics: A Novel Continuum Framework for the Photoelectrochemistry of Living Systems Coupled Molecular/Continuum Simulation of Polymers Das Antwortspektrenverfahren für Erdbebensimulationen Degree of Cure-dependent Modelling for Polymer Curing Processes at Small-strains Dehydration-induced shrinkage of dentin as a potential cause of vertical root fractures Determination of Bone Quality During Implant Surgery-A Novel Approach Development of a contact model for an electric motor lamination stack Development of a contact model for an electric motor lamination stack Development of a model to describe the stiffness of an electric motor lamination stack Development of a model to describe the stiffness of an electric motor lamination stack Dynamic performance of dielectric elastomers utilized as acoustic actuators Effect of model parameters on finite element analysis of micromotions in implant dentistry Effect of model parameters on finite element analysis of micromotions in implant dentistry Eight-chain Model and Its Variants for Hyperelastic Rubber-like Materials: A Comparative Study Experimental Investigation and Numerical Modelling of VHB 4910 Polymer Experimental study and numerical modelling of VHB 4910 polymer Finite Element Analysis on bone adaptation induced by non-passively fitting implant superstructures Finite element formulations for 3d convex polyhedra in nonlinear continuum mechanics Halfspace Simulation of Rough Surface Contact in Metal Forming Halfspace Simulation of Rough Surface Contact in Metal Forming Homogenization and modelling of technical textiles Homogenization and modelling of technical textiles Hyperelastic models for rubber-like materials: Consistent tangent operators and suitability for Treloar's data Identification of Microscopic Material Parameters Within Nonlinear Computational Homogenization Using Gradient-based Optimization Algorithms Investigation of the Dynamic Behavior of Braking Disk Joints Macroscopic modelling of the selective beam melting process Macroscopic modelling of the selective beam melting process Material model identification for DC04 based on the numerical modelling of the polycrystalline microstructure and experimental data Material model identification for DC04 based on the numerical modelling of the polycrystalline microstructure and experimental data Material Parameter Identification utilizing Optical Full-Field Strain Measurement and Digital Image Correlation Material Parameter Identification utilizing Optical Full-Field Strain Measurement and Digital Image Correlation Material parameter optimization utilizing full-field strain measurement data and the Finite Element Method Material parameter optimization utilizing full-field strain measurement data and the Finite Element Method Mechanical Behaviour of a Cellular Composite under Quasi-Static, Static and Cyclic Compression Loading Mechanical Behaviour of VHB 4910 Polymer: Experiments, Modelling and Validation Micro-to-macro Transitions for Continua with Energetic Surfaces at the Microscale Micro-to-macro Transitions for Continua with Energetic Surfaces at the Microscale Micromechanical Modelling for Viscoelastic Electro-active Polymers Micromechanics, Interfaces and Multi-scale Modelling Micromotion of dental implants - basic mechanical considerations Modeling of curing processes based on a multi-field potential. Single- and multiscale aspects Modelling and computation of curing and damage of thermosets Modelling and homogenization of technical textiles Modelling and simulation of curing and damage of thermosetting adhesives More Hyperelastic models for rubber-like materials: Consistent tangent operators and Comparative Study Multiharmonic Balance Analysis of a friction oscillator including a bolted joint Multiharmonic Balance Analysis of a Jointed Friction Oscillator Multiharmonic Balance Analysis of a jointed friction oscillator Multiscale Modelling of Continua with Energetic Surfaces at the Microscale Multiscale Modelling of Continua with Energetic Surfaces at the Microscale Non-Linear Modeling of Magneto-Sensitive Elastomers within a Mixed-Finite-Element Framework Numerical analysis of the maximum load level in lightweight metal/fibre-reinforced polymer structures On 3-D coupled BEM-FEM simulation of nonlinear electro-elastostatics On a recursive algorithm for avoiding mesh distortion in inverse form finding On axisymmetric motions of a finitely deformed magnetoelastic thick-walled circular cylindrical tube On consistent tangent operator derivation and comparative study of rubber-like material models at finite strains On finite strain models for nano-filled glassy polymers On inverse form finding for anisotropic materials On Love-type waves in a finitely deformed magnetoelastic layered half-space On some mixed variational principles in electro-elastostatics On the formulation of the spatial and material motion problem in nonlinear electro-elastostatics On the homogenization of technical textiles On the Modelling and Computation of Nano-Sized Solids with Surface and Interface Thermomechanics On the released energy in nonlinear electro-elastostatics On the spatial and material motion problems in nonlinear electro-elastostatics with consideration of free space On two different inverse form finding methods for hyperelastic and elastoplastic materials Performance considerations for a nonlinear thermomechanical model for the selective beam melting process Plastic deformation of rough surfaces Process Simulation and Two Scale Tool Simulation related to Hybrid Forming Relationships between the admissible range of surface material parameters and stability of linearly elastic bodies Screw loading and gap formation in implant-supported fixed restorations: Procera implant bridge vs. conventionally cast screw-retained restorations Selbstheilende Polymere fuer eine interdisziplinäre Herausforderung Separation of magnetic particles in channel flows by BEM Simulation of 3d Fatigue Crack Propagation Using an Implicit Time Integration Scheme Simulation of the elastohydrodynamic contact with a piezo-viscous fluid Simulation of woven, knitted and spacer fabrics based on multi-scale models with large deformations Surface waves in a finitely deformed incompressible magnetoelastic medium Surface waves in magnetoelastic solids The Admissibility of Negative Material Parameters for Surface Elasticity Theory The Multiscale Approach to the Curing of Polymers incorporating Viscous and Shrinkage Effects Thermomechanical Modelling and Simulation of Electron Beam Melting Thermomechanics of Continua with Energetic Surfaces/Interfaces Thermomechanics of Solids with Lower-Dimensional Energetics: On the Importance of Surface, Interface and Curve Structures at the Nanoscale. A Unifying Review Towards inverse form finding methods for a deep drawing steel DC04 Towards inverse form finding methods for a deep drawing steel DC04 Towards molecular statics simulation of ferroelectric materials Towards the Modelling of Self-healing Polymers Unified magnetomechanical homogenization framework with application to magnetorheological elastomers Use of osteotomes for implant bed preparation - effect on material properties of bone and primary implant stability
	2011 A Cohesive Crack Propagation Model: Mathematical Theory and Numerical Solution A comparison between inverse form finding and shape optimization methods for anisotropic hyperelasticity in logarithmic strain space A comparison between inverse form finding and shape optimization methods for anisotropic hyperelasticity in logarithmic strain space A Deformational and Configurational Framework for Geometrically Nonlinear Continuum Thermomechanics Coupled to Diffusion A Deformational and Configurational Framework for Geometrically Nonlinear Continuum Thermomechanics Coupled to Diffusion A finite element framework for continua with boundary energies. Part III: The thermomechanical case A finite element method for a three-field formulation based on biorthogonal systems A fully plastic halfspace formulation for the contact of rough surfaces A fully plastic halfspace formulation for the contact of rough surfaces A mixed finite element formulation for magneto-sensitive elastomers Adaptive h-refinement based on topological sensitivities on finite element meshes An internal-variable rod model for stress-induced phase transitions in a slender SMA layer. I. asymptotic equations and a two-phase solution An internal-variable rod model for stress-induced phase transitions in a slender SMA layer. II. analytical solutions for the outer loop and inner loops Aspects of Bifurcation in an Isotropic Elastic Continuum with Boundary Structures Biomechanische Analyse des Femurhalses unter Berücksichtigung osteoporotischer Geometrieänderung der Femurhalsquerschnittsfläche Bone adaptation induced by non-passively fitting implant superstructures - A Finite Element Analysis based on in vivo strain measurements Bone quality testing during dental implant surgery - A novel device for intraoperative compressive testing of alveolar bone BONE QUALITY TESTING DURING DENTAL IMPLANT SURGERY: A novel device for intraoperative compressive testing of alveolar bone C1 Continuous Methods in Computational Gradient Elasticity C1 Continuous Methods in Computational Gradient Elasticity Compressive testing of alveolar bone during dental implant surgery Computational Challenges in the Simulation of Nonlinear Electroelasticity Computational Challenges in the Simulation of Nonlinear Electroelasticity Computational Challenges in the Simulation of Nonlinear Electroelasticity Computational Homogenization and Parameter-Identification for Heterogeneous Inelastic Materials Computational Homogenization and Parameter-Identification for Heterogeneous Inelastic Materials Computational Issues in the Dynamics of High Speed Grinding Computational Micro-to-Macro Transitions for Heterogeneous Material Layers accounting for In-Plane Stretch Computational Micro-to-Macro Transitions for Heterogeneous Material Layers accounting for In-Plane Stretch Computational Modeling of Case II Diffusion in Polymeric Materials Computational modeling of case II diffusion in polymeric materials Computational Thermomechanics of Continua with Boundary Energies Computational Thermomechanics of Continua with Surface Energies Coupled Problems in Nonlinear Solid Mechanics: Non-Fickian Diffusion Coupling Diffusion, Temperature and Deformation: Continuum Modelling and Computational Simulation Die Entwicklung der Analytischen Mechanik von Euler, Lagrange und Hamilton aus studentischer Sicht Discussion of Experimental Data for 3D Crack Propagation on the Basis of Three Dimensional Singularities Effect of geometric parameters on finite element analysis of bone loading caused by nonpassively fitting implant-supported dental restorations Elastic-plastic halfspace simulation Elastic-plastic halfspace simulation Electronic electro-active polymers under electric loading: Experiments, modeling, and simulation Entwicklung und Evaluierung einer Schubversuchsvorrichtung auf Basis einer Schubfeld-konstruktion für statische und zyklische Beanspruchungen Entwicklung und Evaluierung einer Schubversuchsvorrichtung auf Basis einer Schubfeld-konstruktion für statische und zyklische Beanspruchungen Extension of the Arruda-Boyce model to the modelling of the curing process of polymers Extension of the Arruda-Boyce model to the modelling of the curing process of polymers Geometrically Non-linear Hyperelasticity Coupled with Diffusion and Heat Conduction Geometrically nonlinear continuum thermomechanics coupled to diffusion: a framework for case II diffusion Geometrically nonlinear continuum thermomechanics with surface energies coupled to diffusion Geometrically Nonlinear Continuum Thermomechanics with Surface Energies Coupled to Diffusion Geometrically Nonlinear Continuum Thermomechanics with Surface Energies Coupled to Diffusion Geometrically Nonlinear Gravito-Elasticity: Hyperelastostatics Coupled to Newtonian Gravitation Halfspace Modeling of Elastic-plastic Contact of Rough Surfaces Halfspace modeling of elastic-plastic contact of rough surfaces Homogenization and modeling of fiber structured materials Homogenization and modeling of fiber structured materials Identification of orthotropic plastic material parameters for deep-drawing steel using DIC and FEMU Identification of orthotropic plastic material parameters for deep-drawing steel using DIC and FEMU Identification of the yield surface for sheet steel using an optical measurement system Identification of the yield surface for sheet steel using an optical measurement system Identifikation eines Materialmodells für den DC04 basierend auf der numerischen Modellierung der polykristallinen Mikrostruktur und experimentellen Daten Implant Stability Measurements based on Resonance Frequency and Damping Capacity - a Parametric Finite Element Analysis In vitro validation of a novel diagnostic device for intraoperative determination of alveolar bone quality Isogeometric structural shape optimization using a fictitious energy regularization Isogeometric structural shape optimization using a fictitious energy regularization Mechanical Behavior of a Cellular Composite with Glass Foam Granules in Polymer Matrix under Quasi-Static and Cyclic Compression Loading Mechanical behavior of a circular composite under monotonic and fatigue compression loading Micro-to-macro transitions for heterogeneous material layers accounting for in-plane stretch Microscale modelling and homogenization of fiber structured materials Microscale modelling and homogenization of fiber structured materials MOCOPOLY: Multiscale/Multiphysics Modeling and Computation of Magnetosensitive Polymeric Materials Modeling and simulation of curing and damage in thermosetting adhesives Modelling and Simulation of Damage in Curing Thermosets Modelling and simulation of the curing process of polymers by a modified formulation of the Arruda-Boyce model Models of Solvent Penetration in Glassy Polymers With an Emphasis on Case II Diffusion. A Comparative Review Nonperiodic stochastic boundary conditions for molecular dynamics simulations of materials embedded into a continuum mechanics domain Numerical determination of the maximum load level in ultrasonic welded aluminum/CFRP lightweight structures Numerical Simulation of Electric Electro-Active Polymers Numerical simulation of friction in metal forming using a halfspace model Numerical simulation of friction in metal forming using a halfspace model Numerical simulation of particles movement in cellular flows under the influence of magnetic forces Numerical simulation of particles movement in cellular flows under the influence of magnetic forces On finite strain models for nano-filled glassy polymers On Inverse Form Finding for Anisotropic Elastoplastic Materials On Inverse Form Finding for Anisotropic Elastoplastic Materials On Multiscale Mechanics with Surface Structures On Node-Based Structural Shape Optimization On surface waves in a finitely deformed magnetoelastic half-space On the importance of the free space for the simulation of EEAPs On the solution of the 3D crack surface contact problem using the boundary element method On the spatial and material motion problems in nonlinear electro-elastostatics with consideration of free space Optimal Design of Brittle Composite Materials: a Nonsmooth Approach Optimization of elastic material parameters of sheet metal with FEMU and DIC Optimization of elastic material parameters of sheet metal with FEMU and DIC Parameter identification for nonlinear dynamical systems using multiharmonic balance techniques Parameter identification for nonlinear dynamical systems using multiharmonic balance techniques Parameter identification for nonlinear dynamical systems using multiharmonic balance techniques Quality of alveolar bone - structure dependant material properties and design of a novel measurement technique Quality of alveolar bone - structure dependant material properties and design of a novel measurement technique Regularizing Constraints for Mesh and Shape Optimization Regularizing Constraints for Mesh and Shape Optimization Shape Optimization for Anisotropic Elastoplasticity in Logarithmic Strain Space Shape Optimization for Anisotropic Elastoplasticity in Logarithmic Strain Space Surface Effects in the Mechanics of Nanomaterials and Heterostructures Temperature and Deformation: Continuum Modelling and Computational Simulation Thermomechanical Coupling with Interface Energies. Coupling and Computational Aspects Thermomechanics of Continua with Boundary/Interface Structures Thermomechanics of Continua with Surface/Interface Structures Three dimensional BEM-FEM simulation of electronic electroactive polymers Towards Coupled MD-FE Multiscale Modeling and Simulation of Polymers Towards optimization of crack resistance of composite materials by adjusting of fiber shapes Two-Scale Parameter Identification for heterogeneous elastoplastic materials Two-Scale Parameter Identification for heterogeneous elastoplastic materials Unconstrained and Cauchy-Born-constrained atomistic systems: deformational and configurational mechanics Use of osteotomes for implant bed preparation - effect on material properties and primary implant stability Use of osteotomes for implant bed preparation - effect on material properties of bone and primary implant stability
	2010 A Comparison of Different Approaches in the Multi-Scale Computation of Configurational Forces A fictitious energy approach for shape optimization A finite element framework for continnua with boundary potentials A finite element framework for continua with boundary energies. Part II: The three-dimensional case. A Finite Strain Framework for the Simulation of Polymer Curing. Part II: Viscoelasticity and shrinkage A Hybrid Nodal-Element-Based Discretization Method A variational multiscale approach to the simulation of crack propagation An investigation of algorithms for rate-independent single crystal plasticity Analysis and Application of the Rational B-Spline Finite Element Method in 2D Angewandte Mechanik in der Zahnheilkunde - Experimentelle Spannungsermittlung Angewandte Mechanik in der Zahnheilkunde - Kraftübertragung am Implantat Angewandte Mechanik in der Zahnheilkunde- Einführung: Was ist Biomechanik? Application of a Viscoelastic Material Model in Electro-Mechanics Application of a Viscoelastic Material Model in Electro-Mechanics C1 continuous discretization of gradient elasticity C1 elements for gradient elasticity Cahn-Hilliard generalized diffusion modeling using the natural element method Cahn-Hilliard generalized diffusion modelling using the natural element method Comparing the Lightweight Potential of Different Structure and Material Concepts: Performance Parameters Dependent on Geometry, Materials and Load Case Computational Mechanics of Solids with Boundary Energies Computational Mechanics of Solids with Boundary Energies Computational Thermomechanics with Boundary Structures. Coupled problems in non-linear solid mechanics Coupling particle based and Finite Element simulations using bridging domain methods Crack propagation with the variational multiscale method Determination of alveolar bone quality during dental implant surgery by means of compressive testing Determination of alveolar bone quality during dental implant surgery by means of compressive testing Die Entwicklung der Analytischen Mechanik von Euler, Lagrange und Hamilton anhand von Beispielen. Direct Evaluation of Nonlinear Gradient Elasticity in 2D with C1 Continuous Discretization Methods Direct Evaluation of Nonlinear Gradient Elasticity in 2D with C1 Continuous Discretization Methods Elastic-plastic contact simulation using halfspace theory Elastic-plastic stress analysis of cracked structures using the boundary element method Electronic Electro-Active Polymers: Observation, Modelling and Simulation Entwicklung eines randelementbasierten Programmsystems zur bruchmechanischen Bewertung rissbehafteter Strukturen Experimentelle und numerische Untersuchung des Normal- und Tangentialkontaktverhaltens rauer metallischer Oberflächen Experimentelle und numerische Untersuchung des Normal- und Tangentialkontaktverhaltens rauer metallischer Oberflächen Exploring the Nature of Viscous Electro-Active Material Finite element analysis of an inelastic interface in ultrasonic welded metal/fibre-reinforced polymer joints Force Flow and Stress Distribution in Axial, Horizontal and off-set Loading of Implants (in Ukrainian, abstract in English) Homogenisierungsmethoden für zellulare Verbundwerkstoffe im linear-elastischen Bereich Hyperelastic analysis using smooth conformal adaptive Delaunay tessellation Instabilities induced by phase fronts coalescence during the phase transitions in a thin SMA layer: mechanism and analytical descriptions Introduction to finite element analysis and recent developments. Chapter 1 Investigation of dynamic contact phenomena in jointed structures Investigation of dynamic contact phenomena in jointed structures Isogeometric Analysis of 2D Gradient Elasticity Kontaktmechanik - Von Kontakt rauer Oberflächen zur Finite-Element-Diskretisierung Kontaktmechanik - Von Kontakt rauer Oberflächen zur Finite-Element-Diskretisierung Modelling and Computation of Polymer Curing Modelling and Computation of Polymer Curing Multi-Scale Parameter Identification Multiscale Computation of Defect-Driving Forces in Failure Mechanics Multiscale Modeling and Parameter Identification Multiscale simulation of the curing of particle-filled polymers Natural element analysis of the Cahn-Hilliard phase-field model Nonlinear electro-elastostatics: numerical simulation Nonlinear electro-elastostatics:theoretical and numerical aspects Normal contact simulation of non-Gaussian fractal surfaces Normal contact simulation of non-Gaussian fractal surfaces Numerical analysis of the influence of crack surface roughness on the crack path Numerical and experimental investigations of dynamic contact phenomena in jointed structures Numerische und experimentell Untersuchungen zum dynamischen Verhalten von Strukturen mit Fügestellen Numerische und experimentell Untersuchungen zum dynamischen Verhalten von Strukturen mit Fügestellen On bridging domain methods to couple particle- and finite-element-based simulations On Inverse Form Finding for Anisotropic Hyperelasticity in Logarithmic Strain Space On Inverse Form Finding for Anisotropic Materials On Inverse Form Finding For Anisotropic Materials On the C1 continuous discretization of nonlinear gradient elasticity: a comparison of NEM and FEM based on Bernstein-Bézier patches On thermomechanical solids with boundary structures Parameter Identification over Multiple Scales Parameteridentifikation über mehrere Skalen Phase transitions induced by extension in a slender SMA cylinder: analytical solutions for the hysteresis loop based on a quasi-3D continuum model Polygonal finite element formulations for 2d linear-elastic FE problems Polyhedral Finite Element Formulations for 3d Elastic Continua Quality of alveolar bone - Structure dependant material properties and design of a novel measurement technique Quality of alveolar bone - Structure dependant material properties and design of a novel measurement technique Recent Advances in Modelling and Simulation of Curing Polymer Adhesives Recent Progress in the Modelling and Computation of Electro-Active Polymers Regularisierung von Formoptimierungsproblemen mit Hilfe einer fiktiven Energiezwangsbedingung Shell finite elements, with applications in biomechanics Simulation of fracture in heterogeneous elastic materials with cohesive zone models Simulations in Continuum Mechanics, Tutorial The modelling of natural fibre-reinforced composites using a multiscale methodology Theory and Numerics of Viscous Electro-Active Material Towards form finding for anisotropic materials Towards Multiscale Modeling of Polymers Towards node-based shape optimization: a fictitious energy constraint. Untersuchungen zum dynamischen Kontaktverhalten von Fügestellen
	2009 A 2d Coupled BEM-FEM Simulation of Electro-Elastostatics at Large Strain A discontinuous Galerkin formulation of a model of gradient plasticity at finite strains A fictitious energy constraint for node-based shape optimization A fictitious energy constraint for node-based shape optimization A Finite Element Framework for Continua with Boundary Energies. Part I: The Two-Dimensional Case A Finite Element Framework for Continua with Boundary Potentials A Finite Strain Framework for the Simulation of Polymer Curing. Part I: Elasticity A Multiscale Approach for the Simulation of Ductile Fracture A Phenomenological Finite Strain Framework for the Simulation of Elastic Curing A Phenomenological Finite Strain Framework for the Simulation of Elastic Curing A Small-Strain Model to Simulate the Curing of Thermosets A Variational Multiscale Method to Model Crack Propagation at Finite Strains Acceleration of 3D crack propagation simulation by the utilization of fast BEM-techniques An analytical study of the instability of a superelastic shape memory alloy cylinder subject to practical boundary conditions An analytical study on the geometrical size effect on phase transitions in a slender compressible hyperelastic cylinder Angewandte Mechanik in der Zahnheilkunde - Einführung Angewandte Mechanik in der Zahnheilkunde - Experimentelle Spannungsermittlung Angewandte Mechanik in der Zahnheilkunde - Kraftübertragung am Implantat Bauteilbewertung im Rahmen der Bruchmechanik unter Einbeziehung von Plastizität und Berücksichtigung von Eckensingularitäten Bone loading due to different misfit types in implant-supported fixed dental prostheses: A 3D-Finite Element Analysis based on experimental results C1 continuous discretization of gradient elasticity based on Bernstein-Bezier patches CAD-Free Shape Optimization Based on a Fictitious Energy Constraint Chemical and structural characterisation of DGEBA-based expocies by Time of Flight Secondary Ion Mass Spectroscopy (ToF-SIMS) as a preliminary to polymer interphase characterisation Classification of Concepts in Thermodynamically Consistent Generalised Plasticity Computational Homogenization of Defect Driving Forces Computational Homogenization of Heterogeneous Solids Obeying Coupled (Mechanical/Non-Mechanical) Material Behaviour in 3-D Computational Mechanics of Solids with Boundary Potentials Computational Mechanics of Solids with Boundary Potentials Computational Multiscale Modeling of Solids at Failure Computational Multiscale Modelling of Heterogeneous Material Layers Computational Simulation of Continua with Isotropic Surface Potentials Constitutive Contact Laws in Structural Dynamics Constitutive Contact Laws in Structural Dynamics Elastic-plastic stress analysis of cracked structures using the boundary element method Experimental setup for normal contact stiffness measurement of technical surfaces with geometrical irregularities Experimentelle und numerische Untersuchung des Kontaktverhaltens rauer metallischer Oberflächen Finite Strain Viscoelastic Models to Simulate the Curing Process of Polymers Finite Strain Viscoelastic Models to Simulate the Curing Process of Polymers Implantat-Micromotion und resultierende Knochenbelastung bei axialer und extra-axialer Kraftapplikation Investigation of the polymer-metal-interphases by microextensometry IUTAM Symposium on Progress in the Theory and Numerics of Configurational Mechanics Kraftfluss und Spannungsanalyse bei unterschiedlicher Implantatbelastung - eine Modellstudie Material and Spatial Motion Problems in Nonlinear Electro- and Magneto-Elastostatics Material and spatial motion problems in nonlinear electro- and magnetoelastostatics Material Forces in Non-Classical Thermo-Hyperelasticity Material Interfaces with Microstructure: A Multiscale Modelling Approach Mathematical assessment of PWM control of a induction motor Mechanical Interphases in Adhesive Epoxy-Aluminium Joints: Experiments and Finite Element Simulations Mechanical probe for the determination of bone quality Micro-Macro Characterisation of DGEBA-Based Epoxies on the Way to Polymer Interphase Modellin Mikrobewegungen und Kraftübertragung am Zahnimplantat Mikrobewegungen und Kraftübertragung am Zahnimplantat, 11. Internationale Biomechanik- und Biomaterial-Tage München, 10.-11. Juli 2009 Modeling and Simulation of Magneto-Sensitive Elastomers Modeling and Simulation of Magneto-Sensitive Elastomers Modelling and Simulation of Curing Polymer Adhesives Modelling and Simulation of Polymer Curing Modelling and Simulation of Polymer Curing. Modelling and Simulation of Process-Machine Interaction in Grinding Multiscale Modelling and Homogenization of Heterogeneous Materials Multiscale Modelling and Homogenization of Heterogeneous Materials Multiscale modelling and simulation of failure processes and heterogeneous materials. Non-linear stress analyzes of cracked structures by the boundary element method Numerical investigations on the influence of 3D frictional crack surface interaction Numerical Modeling of Non-Linear Magneto-Elasticity Numerical simulation of nonlinear electroelastostatics Numerische Simulation nicht-linearer Elektro-Elastostatik Numerische und experimentelle Untersuchung multifunkionaler Leichtbaustrukturen zur Energieabsorption On a Constraint-Based Regularization Technique for Configurational R-Adaptivity and Shape Optimization On Bridging Domain Methods to Couple Particle- and Finite-element-based Simulations On Bridging Domain Methods to Couple Particle- and Finite-element-based Simulations On Configurational Forces within Green-Naghdi Thermo-Hyperelasticity On Deformational and Configurational Poro-Mechanics: Dissipative Versus Non-Dissipative Modelling of Two-Phase 3 Solid/Fluid Mixtures On Energetic Changes due to Configurational Motion of Standard Continua On Inverse Form Finding for Hyperelasticity in Logarithmic Strain Space On the Configurational Mechanics of Atomistic Systems and the Implications of First and Second Order Cauchy-Born Constraints On the Multiscale Computation of Confined Granular Media On the Multiscale Computation of Defect Driving Forces On the Natural Element Discretization of the Cahn-Hillard Equation Parameters of implant stability measurements based on resonance frequency and damping capacity - a comparative finite element analysis Phase transitions induced by extension in a slender SMA cylinder: analytical solutions for the hysteresis loop based on a quasi-3D continuum model Phase transitions induced by extension in a slender SMA cylinder: analytical solutions for the hysteresis loop based on a quasi-3D continuum model Polygonal finite element formulations Polygonal finite element formulations for 2d linear-elastic FE problems Recent Progress in Multiscale Modeling and Homogenization Secret and Joy of Configurational Mechanics: From Foundations in Continuum Mechanics to Applications in Computational Mechanics Simulation of failure processes with the variational multiscale method Simulation of failure processes with the variational multiscale method Smooth conformal alpha-NEM for Gradient Elasticity Solids with Surface Energies: Modelling and Simulation Spatial and material motion problem in nonlinear electro-elastostatics - a virtual work approach The concept of material forces and the coupled boundary-finite element method in electroelastostatics The concept of material forces in nonlinear electro-elastostatics Towards analysis of materials with gradient effects using C1 NEM Towards Node-Based Shape Optimization: A Fictitious Energy Constraint Towards the treatment of boundary conditions for global crack path tracking in three-dimensional brittle fracture Waffenrohr und Dämpfungseinrichtung
	2008 A Consistent Time FE-Method for Large Strain Elasto-Plastodynamics A finite element framework for the numerical implementation of boundary potentials A Finite Element Framework for the Numerical Implementation of Boundary Potentials A Multiscale Approach for the Modelling of Failure A Multiscale Approach for the Modelling of Failure A Multiscale Approach for the Modelling of Propagating Discontinuities A Note on the Generation of Periodic Granular Microstructures based on Grain Size Distributions Aktuelle Herausforderungen und Chancen in der Technischen Mechanik Algebro-geometric solutions for some (2+1)-dimensional discrete systems An adaptive singular finite element in nonlinear fracture mechanics An Incremental Variational Formulation of Dissipative and Non-Dissipative Coupled Thermoelasticity for Solids Applying DEM outputs to the unified comminution model Aspects of Bifurcation in an Isotropic Elastic Continuum with Orthotropic Inelastic Interface Assessment on the structural integrity based on 3D crack growth simulations Assessment on the structural integrity based on 3D crack growth simulations Bone strength in pure bending: Bearing of geometric and material properties Comparative Tensor Visualisation within the Framework of Consistent Time-Stepping Schemes. Computation Homogenization of Confined Frictional Granular Matter Computational Homogenisation of Material Layers with Micromorphic Mesostructure Computational Modelling of Microcracking Effects in Polycrystalline Piezoelectric Ceramics Computational Modelling of Thermal Impact Welded PEEK/Steel Single Lap Tensile Specimens Computational Multiscale Granular Media Continuum-Atomistic Coupling based on Computational Homogenization Deriving Global Material Properties of a Microscopically Heterogeneous Medium - Computational Homogenisation and Opportunities in Visualisation Different biomechanocal measurement technigues applied in dentistry Finite Elasto-Plasto-Dynamics - Challenges & Solutions Fully Coupled Frictional Contact Using Elastic Halfspace Theory Galerkin-Based Mechanical Integrators for Finite Elastodynamics Formulated in Principal Stretches -- Pitfalls and Remedies Geometric Numerical Integration of Simple Dynamical Systems Geometric properties of the adaptive Delaunay tessellation Influence of Fixation Mode and Superstructure Span upon Strain Development of Implant Fixed Partial Dentures Influence of Fractal Surface Parameters on the Elasto-Plastic Contact Behavior of Rough Surfaces Interfacial Fatigue Modelling of Ultrasonic Metal Welded Tensile Specimens Investigation of Microcracks in Ferroelectric Materials by Application of a Grain-Boundary-Motivated Cohesive Law Investigations of the influence of geometrical irregularities and roughness on the normal contact stiffness of joints Investigations of the influence of geometrical irregularities and roughness on the normal contact stiffness of joints Material force method within the framework of the X-FEM-distribution of nodal material forces Material Force Method: Theoretical and Numerical Aspects in Nonlinear Electro-Elastostatics Material force method: theoretical and numerical aspects in nonlinear electro-elastostatics Material Interfaces with Microstructure: A Multiscale Modelling Approach Measured and Simulated Contact Stiffness of Dry, Metallic Joints Measured and Simulated Contact Stiffness of Dry, Metallic Joints Modelling and Computation of Grain Boundary Fatigue in Piezoelectric Mesostructures Modelling and Simulation of First and Second Sound in Solids Modelling Three-Dimensional Crack Propagation. A Comparison of Crack Path Tracking Strategies Multiscale Computational Granular Media Nonlinear Dynamics of Structures with Joints Normal contact of fractal surfaces — Experimental and numerical investigations Numerical simulation of nonlinear electro-elastostatics On a Solution Strategy for Energy-Based Mesh Optimization in Finite Hyperelastostatics On Boundary Potential Energies in Deformational and Configurational Mechanics On Local Tracking Algorithms for the Simulation of Three-Dimensional Discontinuities On modelling and simulation of the curing of thermosets and elastomers On phenomenological and micro-mechanical models in finite elasticity and viscoelasticity for rubber-like materials On the characterisation and modelling of epoxy-based polymer-metal interphases On the Configurational Mechanics of Kinematically Constrained Bodies On the mathematical formulations of a model of strain gradient plasticity. In Theoretical, Modelling and Computational Aspects of Inelastic Media On the Multiscale Computation of Confined Granular Media On the Propagation of Second-Sound in Linear and Nonlinear Media: Results from Green--Naghdi Theory On the Simulation of Cohesive Fatigue Effects in Grain Boundaries of a Piezoelectric Mesostructure Parameter Identification for Transmission Housings. FE Analysis of a Diecast Aluminium Alloy Perspectives in the Theory and Numerics of Configurational Mechanics Phase transitions in a slender elastic cylinder under tension Precise 3D Crack Growth Simulations Precise simulation of 3D fatigue crack growth Precise simulation of 3D fatigue crack propagation Simulation der 3D Ermüdungsrissausbreitung Simulation of Cryovolcanism on Saturn's Moon Enceladus with the Green-Naghdi Theory of Thermoelasticity Some aspects of a Discontinuous Galerkin formulation for gradient plasticity at finite strains The Adaptive Delaunay Tessellation: A Neighborhood Covering Meshing Technique The two-dimensional laminar wall jet. Velocity measurements compared with similarity theory Time-Dependent Fibre Reorientation of Transversely Isotropic Continua Finite Element Formulation and Consistent Linearisation Towards analysis of materials with gradient effects using C1 NEM Towards Completeness, a Multiscale Approach of Confined Particulate Systems Towards Modeling the Curing Processes of Thermosets Towards modelling the curing process of thermosets Towards Multiscale Computation of Confined Granular Media Contact Forces, Stresses and Tangent Operators Towards the analysis of materials with strain gradient effects using - Natural Element Method Towards the computational homogenization of discrete microstructures Visualization of Particle Interactions in Granular Media Well-posedness of a model of strain gradient plasticity for plastically irrotational materials
	2007 (KEYNOTE LECTURE) Fast 3D crack growth analyses by the combination of fast BEM techniques 3D finite-element modeling of polymeric materials with C1-continuous elements A discontinuous Galerkin formulation for classical and gradient plasticity – Part 1: Formulation and analysis A discontinuous Galerkin formulation for classical and gradient plasticity. Part 2: Algorithms and numerical analysis A BE based finite element for crack propagation processes A computational homogenisation approach to material interfaces A Friction Model Based on Fractal Surface Roughness A locking free element formulation for 3D nonlinear FE problems A Novel Polygonal Finite-Element Method An Adaptive Singular Finite Element in Nonlinear Fracture Mechanics An Efficient FEM/BEM Approach for 3D Crack Propagation Simulation An Efficient FEM/BEM Approach for 3D Crack Propagation Simulation An optimized predictor-corrector scheme for fast 3D crack growth simulations Assessment of Galerkin-Based Time Integrators for Finite Elasto-Plasto-Dynamics Automatic coupling of a boundary element code with a commercial finite element system Bearing of geometric and material properties to bone strength in bending Classical Results for a Non-Classical Theory: Remarks on Thermodynamic Relations in Green-Naghdi thermo-Hyperelasticity Computational Material Forces in Micromorphic Continua Computational Simulation of Remodelling, Growth and Reorientation Contact of rough surfaces – A comparison of experimental and numerical results Different bone loading patterns due to fixation of three-unit and five-unit implant prostheses Ein Beitrag zur Simulation der 3D-Rissausbreitung mit der Randelementmethode Energieabsorbierende Sandwichstrukturen unter Impact-Belastung Energy-Based R-Adaptivity: A Solution Strategy and Applications to Fracture Mechanics Existence of Solutions to the Linearized Spinning Wheel Problem Experiment and Parameter Identification for the Simulation of Compact and Cellular PUR KGK Failure of granular materials at different scales - microscale approach Fast 3D crack growth analyses by the combination of fast BEM techniques Finite Element modeling of polymeric materials with C*-continuous elements From Foundations in Continuum Mechanics to Applications in Computational Mechanics. Secret and Joy of Configurational Mechanics Galerkin-based Time Integrators for Geometrically Nonlinear Elasto-Plastodynamics Generalised Plasticity: Modelling Options and Computational Aspects Generalized parameter identification for finite viscoelasticity. Geometric Numerical Integration for Simple Dynamical Systems Geometrically nonlinear viscoelasticity for rubber-like materials Interaction of Process and Maschine During High-Performance Grinding Towards a Comprehensive Simulation Concept Mechanics of Extended Continua: Modelling and Simulation of Elastic Microstretch Materials Modeling of jointed structures using zero thickness interface elements Modelling and Computation of 3D Discontinuities in Solids Modelling of non-classical thermoelasticity Nonlinear Electro- and Magneto-Elastostatics: Material and Spatial Settings Numerical Methods for the Simulation of Strong Discontinuities Numerical Modelling of Nonlinear Electroelasticity On Configurational Forces in Multiplicative Elastoplasticity On Deformational and Configurational Mechanics of Micromorphic Hyperelasticity On Energy-Based Mesh Optimization in Finite Hyperelastostatics On phenomenological and micro-mechanical models in finite elasticity and viscoelasticity for rubber-like materials On the Application of Hansbo’s Method to Interface Problems On the Material Setting of Gradient Hyperelasticity Progress in Computational Crack Modelling Recent Aspects in the Mechanics of Micromorphic Continua Secret and Joy of Configurational Mechanics. From Foundations in Continuum Mechanics to Applications in Computational Mechanics Simulation of Thermal Impact Welded Lightweight Structures Studies of Validity of the Cauchy-Born Rule by direct Comparison of Continuum and Atomistic Modelling The element-free-Galerkin method in configurational mechanics Theoretical and Numerical Aspects of the Material and Spatial Settings in Nonlinear Electro-Elastostatics Theory and Implementation of Time-Dependent Fibre Reorientation in Transversely Isotropic Materials Three-dimensional simulation of fatigue crack growth in epoxy resins Towards the Algorithmic Treatment of 3D Strong Discontinuities Variational issues in the homogenization of discrete systems Zellulare Metalle im Impact-Versuch- Simulation und Experiment
	2006 A Computational Approach to Nonlinear Dynamics of Constrained Mechanical Systems A contribution to the plastic behavior of cellular bone A contribution to the plastic behavior of cellular bone A Coupled Continuum-Atomistic Approach to Defect Mechanics at the Sub-Micron Scale A Geometrically Nonlinear FE Approach for the Simulation of Strong and Weak Discontinuities A new Nodal/Element Basis Interpolation Scheme for Galerkin Methods An accelerated predictor-corrector scheme for 3D crack growth simulations An Illustration of the Equivalence of the Loss of Ellipticity Conditions in Spatial and Material Settings of Hyperelasticity Computational Modelling of Micromorphic Continua – Theory, Numerics, and Visualisation Challenges Computational Modelling of Strong and Weak Discontinuities Configurational Mechanics of Generalized Continua. Theoretical and Computational Aspects Contact of fractal surfaces - Experimental and numerical results Contact of fractal surfaces - Experimental and numerical results Contact of rough surfaces - A comparison between experimental and numerical results Contact of rough surfaces - A comparison of experimental and numerical results Coupled Modeling and Simulation of Electro-Elastic Materials at Large Strains Coupled Modeling and Simulation of Electro-Elastic Materials at Large Strains Coupled Modeling and Simulation of Electro-Elastic Materials at Large Strains Coupling of 3D boundary elements with curved finite shell elements Coupling of 3D Boundary Elements with Curved Finite Shell Elements Efficient crack growth analyzes by combining fast methods for BEM Elasto-plastic contact of fractal surfaces Elasto-plastic contact of fractal surfaces Experimentelle und Angewandte Mechanik - Ein Querschnitt FEM/BEM coupled simulation of 3D crack propagation FEM/BEM coupled simulation of 3D crack propagation Fixation of Five-Unit Implant-Supported Fixed Partial Dentures and Resulting Bone Loading Fixation of Five-Unit Implant-Supported Fixed Partial Dentures and Resulting Bone Loading: A Finite Element Assessment Based on In vivo Strain Measurements. Galerkin-Based Time Integrators for Geometrically Nonlinear Elasto-Plastodynamics -- Challenges in Modeling & Visualization Herausforderungen für Modellierung und Simulation in der Technischen Mechanik Implementierung eines nichtlinearen FE-Ansatzes für finite eleastische Deformationen Improved coupling of finite shell elements and 3D boundary elements Influence of Fixation Mode and Superstructure Span upon Strain Development of Implant FDP's Knochenbelastung durch Befestigung dreigliedriger Implantatbrücken: eine Finite Element Analyse auf der Basis von in-vitro und in-vivo Dehnungsmessungen Loading Characteristics of restorations supported by dental implants Loading Characteristics of restorations supported by dental implants Loading Characteristics of Restorations Supported by Dental Implants Loading of bone surrounding implants through three-unit fixed partial denture fixation: a finite-element analysis based on in vitro and in vivo strain measurement Metall/Faser-Kunststoff-Verbunde und deren Simulation Multi-axial plastic strain rates in cellular bone based on a plastic potential Multi-axial plastic strain rates in cellular bone based on a plastic potential Multiscale modelling and simulation of failure processes and heterogeneous materials Numerical and experimental investigations of joint deflections under normal load On Configurational Mechanics of Multiplicative Elastoplasticity On Coupled Continuum-Atomistic Multiscale Modelling On Discrete Modeling and Visualization of Granular Media On the Application of Hansbo’s Method for Interface Problems On the Configurational Mechanics of Multiplicative Elastoplasticity On the Mechanics of Defects in Multiplicative Elastoplasticity On the Modelling and Computation of 3d Discontinuities in Solids Plastische Formänderungen am zellularen Knochen - Vom Mesoverhalten zum plastischen Stoffgesetz Points, Elements or both? Tessellation, Interpolation and Discretization Risswachstumssimulationen durch Kombination "Schneller Methoden" in der Randelementmethode RVE-Based Studies on the Coupled Effects of Void Size and Void Shape on Yield Behavior and Void Growth at Micron Scales Strain levels in ceramic veneered three-unit implant FPDs Surface Potentials in Deformational and Configurational Mechanics Surface-Stiffened Halfspace Under the Action of a Horizontally Directed Mindlin Force The combining of fast BEM techniques for efficient 3D crack growth analyzes Theoretical and Computational Aspects of Non-Classical Thermoelasticity Towards a Coupled Continuum-Atomistic Approach to Sub-Micron Scale Defect Mechanics Transition to Plasticity in Continuum-Atomistic Modelling Unterschiede in der Knochenbelastung nach Befestigung von drei- und fünfgliedrigen Implantatbrücken Visualization of Multidimensional Phase Space Portraits in Structural Dynamics Visualization of Multidimensional Phase Space Portraits in Structural Dynamics - Hamiltonian Mechanics, Lie-Group Integration Methods and Pseudo-rigid Bodies Visualization of Multidimensional Phase Space Portraits in Structural Dynamics - Hamiltonian Mechanics, Poincaré sections and the geometrized Hamiltonian Framework Visualization of Multidimensional Phase Space Portraits in Structural Dynamics - Lie-Group Integration Methods, Noncommutativity and Pseudo-ridgid Bodies Vom Atom zur Anwendung: Modellierung und Simulation in der Technischen Mechanik What is required from DEM simulations to model breakage in mills?
	2005 A computational method for the FE simulation of strong and weak discontinuities A FE Approach for the Computation of Strong and Weak Discontinuities at Finite Strains A finite element method for cohesive crack modelling A Finite Element Method for the Computational Modelling of Cohesive Cracks A Framework for Multiplicative Elastoplasticity with Kinematic Hardening Coupled to Anisotropic Damage A Hyperelastodynamic ALE Formulation Based on Referential, Spatial and Material Settings of Continuum Mechanics A Note on Material Forces in Finite Inelasticity A Unified Perspective on Micromorphic and Gradient Hyperelasticity. Spatial and Material Settings A Unified Perspective on the Modelling and Computation of Hyperelastic Generalised Continua. Spatial and Material Settings A Unifying Treatise on Variational Principles for Gradient and Micro-Morphic Continua Advanced simulation of 3D fatigue crack growth by a predictor-corrector procedure considering 3D singularities Advanced simulation of 3D fatigue crack growth by a predictor-corrector procedure considering 3D singularities Anwendung der Randelementmethode in der linear-elastischen Bruchmechanik unter Verwendung schneller Methoden Attempts Towards a Novel Meshless Finite Element Method Berechnung und Optimierung der mechanischen Beanspruchung der glasfaserverstärkten Bandage einer Synchronmaschine Bestimmung plastischer Materialfunktionen mittels eines Laserextensometers Bestimmung plastischer Materialparameter am trabekulären Knochen mittels eines Laserextensometers Biomechanics in the Field of Prosthetic Dentistry Bone loading through three-unit FPD fixation - an FE-assessment based on in vitro and in vivo strain measurements Computational Modeling of Strong and Weak Discontinuities Computational modelling of cohesive cracks at finite strains Computational Modelling of Isotropic Multiplicative Growth Configurational Mechanics of Gradient Hyperelasticity Configurational Mechanics of Large Strain Multiplicative Elastoplasticity Configurational Mechanics of Large Strain Plasticity Conservation Properties of a Time Finite Element Method. Part IV: Higher Order Energy and Momentum Conserving Schemes Coupled FEM/BEM analysis of fracture mechanical problems Coupled FEM/BEM analysis of fracture mechanical problems Coupled Modelling and Simulation of Electro-Elastic Materials at Large Strains Darboux transformation and soliton solutions for the Boiti-Pempinelli-Tu (BPT) hierarchy Darboux transformation and soliton solutions for the Heisenberg hierarchy Different Bone Loading Pattern due to Fixation of 3-Unit and 5-Unit Implant FPDs Einfluss von Strukturstörungen auf die elastisch-plastischen Materialparameter zellularer Werkstoffe Einfluss von Strukturstörungen auf die elastisch-plastischen Materialparameter zellularer Werkstoffe Einführung in die numerische Integration Elastisch-plastisches Materialverhalten und FE-Implementierung Elasto-plastic contact of fractal surfaces Experimental investigation of the elastic-plastic material parameters of metal foams FE-Analysis of bone loading caused by multi-span implant FE-assessment of bone loading as a consequence of superstructure fixation Finite Element Approaches to Non-Classical Heat Conduction in Solids Fuzzy arithmetical modeling and simulation of structures with uncertain parameters Fuzzy arithmetical modeling and simulation of structures with uncertain parameters Fuzzy arithmetical modeling and simulation of structures with uncertain parameters Fuzzy-Arithmetik - Ein neuer Zugang zur Simulation und Analyse von Systemen mit unscharfen Parametern In vitro- und in vivo-Untersuchungen zur Spannungsentwicklung bei Implantatbrücken Investigation of 3D crack propagation problems via fast BEM formulations Kontaktmechanik - Von der rauen Oberfläche zur Finite-Elemente-Diskretisierung Material Forces in Computational Single-Slip Crystal-Plasticity Mechanics of Material Forces Modellierung und Numerik von Schneid- und Reissvorgängen duktiler Materialien Modellierung und Simulation von elektroelastischen Materialien bei großen Verzerrungen Modelling of Mass Changes in Anisotropic Materials Novel FE Discretization Methods for the Computation of Strong and Weak Discontinuities at Finite Strains On Frictionally Constrained Wing- Cracks On Material Interfaces in Thermomechanical Solids On Novel FE Formulations in Nonlinear Continuum Mechanics. Applications to Strong and Weak Discontinuities On Potential Energy Shifts in Hyperelastic Energy-Momentum Tensors On Recent Progress in the Theory and Numerics of Material Forces On the Modelling and Computation of Electro-Active Materials at Large Strains On Well Posedness in Continuum Interface Problems Plastische Volumenänderungen im trabekulären Knochen bei mehrachsiger Beanspruchung Schädigung, Ermüdung und Adaption unter Verwendung von Stoffmodellen der kontinuierlichen Schädigung Smoothed Hydrodynamics (SPH) and Its Modified Versions: Background and Code Implementation Spannungsentwicklung bei Implantatbrücken Structural Optimisation by Simultaneous Equilibration of Spatial Forces and of Material Forces The computational modelling of mesh-independent weak discontinuities Towards a Novel Meshless Finite Element Method Untersuchungen zum Bremsenquitschen am Balken-Scheibe Modell Visualization of Multidimensional Phase Space Portraits in Structural Dynamics - State of the art report Zellulare Materialien unter elastisch-plastischer Beanspruchung Zellulare Materialien unter elastisch-plastischer Beanspruchung - werkstoffmechanische Modellierung Zellularer Knochen unter elastisch-plastischer Beanspruchung - werkstoffmechanische Modellierung Zur Formulierung versteifungsfreier Volumenelemente mit Anwendung auf flexible Mehrkörpersysteme
	2004 A Hybrid Discontinuous Galerkin Interface Method for the Computational Modelling of Failure A new approach for the FE modelling of cohesive cracks A new approach for the FE modelling of cohesive cracks A three-dimensional analysis of media motion and grinding regions in mills A time dependent healing function for immediate loaded implants An ALE Formulation Based on Spatial and Material Settings of Continuum Mechanics. Part 1: Generic Hyperelastic Formulation An ALE Formulation Based on Spatial and Material Settings of Continuum Mechanics. Part 2: Classification and Applications An Open System Approach Towards the Simulation of Chemomechanically Induced Concrete Failure Application of the Material Force Method to Thermo-Hyperelasticity Aspects of the Simulation of Multibody Systems Coupled with Nonlinear Finite Elements Automatische Differentiation - Theoretische Grundlagen und Einführung in ADIFOR 2.0 Beschleunigte Rissfortschrittssimulation mit der Randelementmethode unter Verwendung von Niedrigrang-Matrizen Bone Loading in Three-Unit Cemented and Screw-retained FPDs: An FE-Analysis Based on In Vitro and In Vivo-investigations Cement fixation and screw retention: parameters of passive fit: An in vitro study of three-unit implant supported fixed partial dentures Computational Modelling of Healing. An Application of the Material Force Method Computational Spatial and Material Settings of Continuum Mechanics. An Arbitrary Lagrangian Eulerian Formulation Configurational Forces in Mechanics Conserving Time Integrators for Nonlinear Elastodynamic Conserving Time Integrators for Nonlinear Elastodynamic Contributions to the experimental validation of the discrete element method applied to tumbling mills Do bridge span and fixation mode influence the strain development of implant superstructures? Dual Equilibrium Problem with Application to Mesh Optimization and Structural Optimization Elastic-plastic behavior of trabecular bone: Numerical simulation of a yield criterion Elastisch-plastisches Verhalten von trabekulären Knochen: Numerische Simulationen an zellularen elastisch-plastischen Strukturen Elasto-Plastic Normal Contact of Three-Dimensional Fractal Surfaces Using Halfspace Theory Experimental investigations of 3D fatigue crack propagation Finite element modelling of cohesive cracks Flexibility Optimization of a Hexapod Machine Tool Fuzzy arithmetical modeling and simulation of vibrating structures with uncertain parameters Fuzzy-arithmetische Modellierung und Simulation von Systemen mit unscharfen Parametern Fuzzy-arithmetische Modellierung und Simulation von Systemen mit unscharfen Parametern Improved Experimental Tracking Techniques for Validating Discrete Element Method Simulations of Tumbling Mills In vitro strain development in bridges supported by three implants In Vitro Study on Passive Fit in Implant Supported Five-Unit FPDs Konzepte der Numerik endlicher Rotationen Kopplung eines Finite Elemente Systems mit der Randelementmethode Material Force Method. Continuum Damage and Thermohyperelasticity Material Forces in Open System Mechanics Nitsche’s Method for Nonlinear Elasticity On Geometrically Nonlinear Electro-Elastic Materials On the Comparison of Two Approaches to Compute Material Forces for Inelastic Materials. Application to Single-Slip Crystal-Plasticity On the computation of material forces in continuum-atomistic modelling On the impact of Configurational Mechanics on Computational Mechanics Recent Challenges of Computational Mechanics in Modern Engineering Sciences Schädigung und Bruch von Aluminium-Legierungen unter Berücksichtigung der Spannungsmehrachsigkeit - Abschlussbericht zum DFG-Projekt Ku 360/14-1 und Ku 360/14-2 Simulation und Analyse eines Crash-Tests mit unscharfen Parametern Symmetrische Kopplung von Finite-Elemente-Schalenstrukturen mit der 3D-Randelementmethode Theoretical and Numerical Aspects of Thermomechanical Interfaces in Solids Theory and Implementation of Orthotropic Materials in Growing Continua Thermomechanical Interfaces in Solids. Theoretical Aspects Towards a Unified Approach to Defect Mechanics. The Secret of Configurational Mechanics Uncertainty Modeling Using Efficient Fuzzy Arithmetic Based on Sparse Grids: Applications to Dynamic Systems Untersuchung zur Spannungssituation bei verschraubten Implantatbrücken Yield-behaviour of closed-cell metal foams in the elastic-plastic transition region
	2003 A Framework for Viscoplasticity Coupled to Anisotropic Damage A General Strategy for the Mixed-Dimensional, Symmetric Coupling of FEM and BEM A hybrid dG/interface approach for the modelling of failure A Micropolar Microplane Theory A View on Anisotropic Finite Hyper-Elasticity Advanced Computational Engineering Mechanics An Energy Minimizing Mesh Optimisation Strategy Based on the Equilibration of Discrete Spatial and Material Forces An Optimization Strategy for FE-Discretizations Based on Spatial and Material Settings of Continuum Mechanics Analysis of Coupled Finite Element and Atomistic Models Anisotropic Damage with the MCR Effect Coupled to Plasticity Application of the Material Force Method to Isotropic Continuum Damage. Arbitrary Lagrangian-Eulerian (ALE) Mesh Optimisation by Equilibration of Discrete Material Forces Aspekte kontinuums-atomistischer Modellierungen Biomechanical Aspects of Implant Supported Overdentures Biomechanische Untersuchungen zum elastisch-plastischen Verhalten von trabekulärem Knochen Computational Modelling of Biological Growth Phenomena Computational Modelling of Failure with the Discontinuous Galerkin Method Computational Modelling of Failure with the Discontinuous Galerkin Method Computational Modelling of Growth. A Critical Review, A Classification of Concepts and Two New Consistent Approaches Constrained Dynamics of Geometrically Exact Beams Continuum Modelling of Higher Gradient Inelasticity Diskrete und kontinuumsmechanische Modellierung des elastisch-plastischen Verhaltens von Verbunden mit zellularem Kern Ductile damage in aluminium alloys Elastisch-plastisches Verhalten von Verbunden mit zellularem Kern Elasto-plastic contact of fractal surfaces Experimental investigations of 3D fatigue crack propagation Experimental investigations of 3D fatigue crack propagation Experimentelle und numerische Untersuchungen zum mechanischen Verhalten perforierter Aluminium-Legierungen unter zyklischer Belastung Festigkeit, Schädigung und Stoffgesetz zellularer Metalle unter mehrachsiger Beanspruchung - Abschlussbericht zum DFG-Projekt Ku 360/15-1 und Ku 360/15-2 Flexible Multibody Systems with Large Deformations and Nonlinear Structural Damping using Absolute Nodal Coordinates Flexible Multibody Systems with Large Deformations using Absolute Nodal Coordinates for Isoparametric Solid Brick Elements Geometrically Nonlinear Anisotropic Inelasticity Based on Fictitious Configurations: Application to the Coupling of Continuum Damage and Multiplicative Elasto-Plasticity In vitro strain development in brigdes supported by two implants Interforaminale Verbindungselemente und die Kraftübertragung auf Implantat und Lager Kontinuums- und Kontaktmechanik Mass- and Volume Specific Views on Thermodynamics for Open Systems Mass- and Volume-Specific Views on Thermodynamics for Open Systems Metallschaumverbundstrukturen - Prozesstechnologie und werkstoffmechanische Analyse Mixed-dimensional, symmetric coupling of FEM and BEM Modellierung von Fügestellen Modellierung von Fügestellen Modelling of failure with a hybrid dG/ interface approach Modelling of failure with a hybrid dG/ interface approach Modelling of the elastic-plastic transition region in metal foams Multi-Criteria Optimization of Stiffness and Design of a Hexapod Machine Numerische Ermittlung des Fließverhaltens zellularer Metalle im elastisch-plastischen Übergangsbereich mit Polyeder-Einheitszellen Numerische Simulation und Untersuchung der Strömungseigenschaften im Nachlauf skalierter kritischer Rotorprofile Numerische Simulation und Untersuchung der Strömungseigenschaften im Nachlauf skalierter kritischer Rotorprofile On Higher Gradients in Continuum-Atomistic Modelling On Spatial and Material Settings of Thermo-Hyperelastodynamics for Open Systems On the Coupling of Continuum Atomistics and Finite Elements On the elastic-plastic transition zone in cellular metals On the Formation of Microstructures within Continuum-Atomistic Modelling On the Impact of Configurational Mechanics in Computational Mechanics On the Spatial Formulation of Anisotropic Multiplicative Elasto-Plasticity On Thermomechanic Interfaces in Solids: Prospects and Limitations Parallel Evolutionary Optimization of Multibody Systems with Application to Railway Dynamics Singularities with application to fatigue crack growth propagation Spannungsentwicklung 5-gliedriger Implantatbrücken Studies in Elastic Fracture Mechanics Based on the Material Force Method. Symmetric coupling for finite shell elements and 3d boundary elements The Issue of Passive Fit-FE-Analysis Based on In vitro and In vivo Measurements Theory and Numerics of a Thermodynamically Consistent Framework for Geometrically Nonlinear Gradient Plasticity Theory and Numerics of Geometrically Nonlinear Open System Mechanics Thermodynamics of Open Systems with Application to Chemomechanical Problems Traglastabschätzungen am elastisch-plastischen Sandwichbalken mit zellularem Kern Untersuchung zur Spannungssituation bei verschraubten Implantatbrücken Werkstoffmechanische Modellierung des trabekulären Knochens Werkstoffmechanische Modellierung zellularer Materialien Yield behaviour of metal foams in the elastic-plastic transition region Zu Aspekten kontinuumsmechanisch-atomistischer Modellierungen
	2002 A DAE Approach to Flexible Multibody Dynamic A Formulation for an Unsaturated Porous Medium Undergoing Large Inelastic Strains A Formulation for Flexible Multibody Systems with Mixed Cartesian and Relative Coordinates A Mathematical and Numerical Model for Finite Elastoplastic Deformations in Fluid Saturated Porous Media A Predictor - Corrector Procedure for the Determination of the Shape of 3D Crack Fronts A Receding Contact Problem in Elastostatics A Study on Brake Squeal Using a Beam-On-Disk Model A symmetric Galerkin BEM implementation for 3D elastostatic problems with an extension to curved elements Anisotropic Damage Coupled to Plasticity: Modelling Based on the Effective Configuration Concept Berechnung der Spitzengeschwindigkeit in einem Stoßdraht--Lithotripter Bestimmung von Singularitäten im Nahfeld von 3D Rissen Bewertung von Spannungszuständen bei der experimentellen Bestimmung des Schubmoduls an zellularen Materialien Computational Assessment of Defects and Fracture Computational Assessment of Defects and Fracture by the Material Force Method Computational Assessment of Defects and Fracture by the Material Force Method Conservation Properties of a Time Finite Element Method. Part III: Mechanical Systems with Holonomic Constraints Construction of a Finite Element Damping Matrix from Measured Modal Data Construction of a finite element damping matrix from measured modal data Continuum-Atomistic Modelling: A Scale Bridging Tool Die Methode der Materiellen Kräfte. Ein kontinuumsmechanischer Zugang zur numerischen Defektmechanik Die Methode der Materiellen Kräfte: Ein Zugang zur Theorie und Numerik der Kontinuumsdefektmechanik Dual Reciprocity BEM formulation without matrix inversion Frame-Indifferent Beam Finite Elements Based Upon the Geometrically Exact Beam Theory Geometrical and Material Nonlinear Analysis of Fully and Partially Saturated Porous Media Geometrically Nonlinear Functional Adaption of Biological Microstructures Is there Passive Fit in Cemented and Screw Retained FPDs? Material Forces and Defect Mechanics. A Continuum Mechanics Approach Mathematical and Numerical Model for Finite Elastoplastic Deformations in Fluid Saturated Porous Media Mixed-dimensional, symmetric FEM/BEM-coupling Modelling of Joints On Continuum-Atomistic Modelling On Spatial and Material Settings of Continuum Thermodynamics On Spatial and Material Settings in Continuum Mechanics On Spatial and Material Settings of Continuum Mechanics On Spatial and Material Settings of Hyperelastodynamics On Spatial and Material Settings of Hyperelastostatics Crystal Defects On Spatial and Material Settings of Thermo-Hyperelastodynamics Parameteridentifizierung des Kalziumauslaugens von Beton Recent Advances in the Theory and Computation of Material Forces Single Crystal Defects: Peach-Koehler Force Revisited Spannungsentwicklung bei zementierten und verschraubten Implantatbrücken Strain levels in cemented and screw retained three-unit FPDs Strain situation after fixation of 5-unit FPDs Strain situation after fixation of 5-unit FPDs. Theoretical and Computational Issues of Bone Remodelling Thermo-mechanical coupling in contact problems Two Strategies towards Geometrically Nonlinear Isotropic Gradient Damage Untersuchung zur Spannungssituation bei zementierten Implantatbrücken Views on Spatial and Material Settings in Continuum Mechanics
	2001 3D Crack growth simulation A Dual Reciprocity Boundary Element formulation for transient non-linear conduction-radiation problems A Finite Element Algorithm for Parameter Identification of Material Models for Fluidsaturated Porous Media A Modeling for Energy Release Rate of Fiber/Matrix Interfacial Fracture Based on a Variational Approach A Theoretical and Computational Framework for Anisotropic Continuum Damage Mechanics at Large Strains A Theoretical and Computational Framework for Anisotropic Inelasticity A Thermodynamically Consistent Approach to Microplane Theory. Part II: Dissipation and Inelastic Constitutive Modeling A View of the Theory and Computation of Hyperelastic Defect Mechanics A View on the Theory and Computation of Hyperelastic Defect Mechanics A View on the Variational Setting of Micropolar Continua An Approach towards Material Forces based on Spatial and Material Settings of Continuum Mechanics Application of Material Forces in Geometrically Nonlinear Defect/Fracture Mechanics Application of Material Forces to Hyperelastostatic Fracture Mechanics.Part II. Computational Setting Asymptotic behaviour of the elastic solution near the tip of a crack situated at a nonideal interface Berücksichtigung modaler Dämpfung im Craig-Bampton--Verfahren Boundary element solution of coupled heat conduction radiation problems in the presence of shadow zones Comparative study of interface crack for different wedge interface models Computational Localization Analysis of Continuum-Atomistic Models Conservation Properties of a Time Finite Element Method. Part II: Time Stepping Schemes for Nonlinear Elastodynamics Conservative Integrators for Constrained Mechanical Systems. I: The Mixed Galerkin Method Constrained Integration of Rigid Body Dynamics Constrained Mechanical Systems. I. A New Galerkin-Based Time Integrator Constrained Mechanical Systems. I. A New Galerkin-Based Time Integrator Constrained Mechanical Systems. II. Rigid Body Dynamics Contact laws for rough surfaces Elastic-plastic behaviour of perforated aluminium under tension and compression Elastisch-plastisches Übergangsverhalten zellularer Materialien: Experimentenumerische Simulation, werkstoffmechanische Modellierung Elastisch-plastisches Übergangsverhalten zellularer Materialien: Numerische Simulation und werkstoffmechanische Modellierung Experimental and numerical investigations of ductile damage in aluminium alloys Formulation and Computation of Geometrically Nonlinear Anisotropic Inelasticity Fracture simulation of heterogeneous materials with lattice models Higher Gradient Plasticity at Large Strains Implementierung von linearen Viereckelementen in das Randelementprogramm BETSYMM Interface crack and nonideal interface concept Interface crack and nonideal interface concept (Mode III) Kraftflussanalysen an Zahnimplantaten - Experimente und werkstoffmechanische Modellierung Localization Analysis of Mixed Continuum-Atomistic Models Material Forces in Computational Fracture Mechanics Mechanik des festen Knochen: Werkstoffmechanische Experimente und Simulation Mechanik des trabekulären Knochen: werkstoffmechanische Experimente und numerische Simulationen Micromechanical fracture simulation with lattice models Multibody System/Finite Element Contact Simulation with an Energy-Based Switching Criterion On Spatial and Material Settings of Hyperelastodynamics On the Comparison of two Strategies to Formulate Orthotropic Hyperelasticity On the Indentation of a Membrane Reinforced Elastic Halfspace: Analytical and Computational Approaches On the Theory and Computation of Anisotropic Damage at Large Strains Perforated aluminum-alloys as a model for the nonlinear behavior of cellular materials Prosthesis attachment selection and its influence on loading of implant and bearing area Prosthesis attachment selection and its influence on loading of implant and bearing area. Part 1: In vivo verification of stereolithograghic model. Prosthesis attachment selection and its influence on loading of implant and bearing area. Part 2: A method study using five types of prosthesis attachment Solution of Multi-Field Problems using Finite and Boundary Element Methods Some Aspects of a Gradient Damage Formulation Special modelling of the interface crack problem (Mode I and II) Stetigkeitsanalyse von 3D Rissoberflächen Surface Models for Contact Laws Surface models for contact laws Symmetric coupling of three dimensional BE domains with two dimensional FE structures Theoretical and Computational Aspects of a Thermomechanically Consistent Framework for Geometrically Linear Isotropic Gradient Damage Theory and Numerics of a Thermodynamically Consistent Framework for Geometrically Linear Gradient Plasticity Theory and Numerics of Material Forces in Defect Mechanics Views on Hyperelastodynamics in Spatial and Material Setting Views on the Motivation and Computation of Gradient Plasticity Vom Knochen zum realen Metallschaum.
	2000 A Fuzzy Arithmetical Approach to the Solution of Finite Element Problems with Uncertain Parameters A Geometrically Nonlinear Framework for Continuum Damage Mechanics A Localization Capturing FE-Interface Based on Regularized Strong Discontinuities at Large Inelastic Strains A Symmetric Galerkin BEM Implementation for 3D Elastostatic Problems with an Extension to Higher Order Elements An FE-Approach to Gradient Plasticity Anwendung der Schädigungsmechanik zur Beurteilung der Grenzfläche osseointegrierter Zahnimplantate Application of Material Forces to Hyperelastostatic Fracture Mechanics. Part I: Continuum Mechanical Setting Aspekte der numerischen Homogenisierung heterogener Metallschaumstrukturen bei großen inelastischen Verzerrungen Aspekte der Numerischen Homogenisierung von heterogenen Aluminiumschaumstrukturen bei grossen inelastischen Verformungen Comparison of the basic and the discontinuity formulation of the 3D-dual boundary element method Conjugate heat transfer by boundary-domain integral method Conjugate thermosolutal natural convection Conservation Properties of a Time Finite Element Method. Part I: Time-Stepping Schemes for N-Body Problems Contact Laws for Rough Surfaces Damage and Fracture of Perforated Aluminum Alloys Derivation of the Fourth-Order Tangent Operator Based on a Generalized Eigenvalue Problem Die Bedeutung materieller Kräfte in der hyperelastischen Bruchmechanik Dual reciprocity BEM-BDIM technique for conjugate heat transfer computations Festigkeit, Schädigung und Stoffgesetz zellularer Metalle unter mehrachsiger Beanspruchung Finite Elements in Time: Time Stepping Schemes for Nonlinear Elastodynamics Higher Gradient Single Crystal Plasticity Based on the Continuum Theory of Dislocations Implementierung von quadratischen Dreieckelementen in das Randelementprogramm BETSYMM Indirekte Berechnung von Knochenumbauvorgängen Inherently Energy Conserving Time Finite Elements for Classical Mechanics Konstruktion einer FE-Dämpfungsmatrix aus gemessenen modalen Dämpfungen Material Forces in Geometrically Nonlinear Computational Fracture Mechanics Metallographische Untersuchungen zur duktilen Schädigung in Aluminium-Legierungen Numerische Ermittlung elastischer Eigenschaften von Metallschäumen mit Polyeder-Einheitszellen On the Continuum Formulation of Higher Gradient Plasticity for Single and Polycrystals Perforierte Aluminium-Legierungen als Modell für Schädigung und Bruch in zellularen Metallen Surface models for contact laws Theoretical and Computational Aspects of Material Forces in Hyperelastostatic Fracture Mechanics Theory and Computation of Gradient Plasticity Theory and Computation of Material Forces in Geometrically Nonlinear Fracture Mechanics Trabecular Bone Behavior and Remodeling - Based on Equations of Continuum Damage Mechanics Untersuchung des Ermüdungsrißwachstums an einer Vierpunktbiegeprobe unter Mixed-Mode-Beanspruchung View on the Variational Setting of Micropolar Continua Vom Knochen zum Metallschaum. FEM-Software gestützte Werkstoffmechanik für zellulare Materialien Werkstoffmechanische Anmerkungen zum Seitenaufprallträger
	1999 A Family of Energy Conserving Time-Stepping Schemes for Classical Mechanics and Elastodynamics A Finite Element Formulation for Strong Discontinuities in Fluidsaturated Porous Media A Theoretical and Computational Setting for Geometrically Nonlinear Damage Mechanics A Unified Sensitivity Analysis Approach for Parameter Identification of Material Models in Fluid-Saturated Porous Media Aspects of the Formulation and Computation of Higher Gradient Regularized Softening Materials Biomechanische Analyse der Knochenbeanspruchung bei osseointegrierten Implantaten Computation of Geometrically Nonlinear Fracture Mechanics Problems Computational fluid dynamics by boundary-domain integral method Contact laws for rough surfaces Continuum Damage Mechanics and the Behavior of Bone Determination of Material Properties of Plates from Modal ESPI Measurements DRBEM solution of mass and momentum transport in solidification Dry Normal Contact Between a Flexible Rolling Bearing Outer Ring and a Flexible Housing Ein Softwarepaket zur Bestimmung von Kontaktsteifigkeiten aus gemessenen Oberflächendaten Elasto-Plastic Contact of Rough Surfaces Energy Conserving Time Stepping Schemes. Motion of Single Particles FE-Analysen in der zahnärztlichen Implantologie: Biomechanische Analyse der Knochenbeanspruchung bei osseointegrierten Implantaten FEM-Analysen in der zahnärztlichen Implantologie. Finite Element Embedded Localization Band for Finite Strain Plasticity Based on Regularized Strong Discontinuities Finite Element Problems with Uncertain Parameters Formulation and Computation of Geometrically Nonlinear Gradient Damage Implementation of an Advanced Symmetric Galerkin BEM-Formulation for 3D-Elastostatics Implementierung von User Subroutines in das FE-Programm MARC/MENTAT Indentation of a Functionally Graded Elastic Solid: Application of an Adhesively Bonded Plate Model Mode Lock-In and Friction Modeling Modelling of Localisation at Finite Inelastic Strains in Fluid Saturated Porous Media Numerische Simulation der 3D-Rissausbreitung mit der Randelementmethode On Geometrically Nonlinear Problems in Fracture Mechanics On Localization in Thermo-Elastoplastic Solids Subjected to Adiabatic Conditions On Using Fuzzy Arithmetic to Solve Problems with Uncertain Parameters Optimierung des Rissfortschrittsalgorithmus eines 3D-Randelementprogrammes Primitive variable dual reciprocity boundary element method solution of incompressible Navier-Stokes equations Softening Materials at Large Strains: Theoretical and Computational Aspects Some Advantages of Stochastic Methods in MulticriteriaOptimization of Multibody Systems Theoretical and Computational Aspects of Geometrically Nonlinear Problems in Fracture Mechanics Theoretical and Computational Aspects of Geometrically Nonlinear Problems in Fracture Mechanics Theoretische und numerische Aspekte der Kontinuumsmechanik inelastischer Materialien Thermomechanical Coupling in Contact Problems Thermomechanical coupling in contact problems Transient non-linear heat conduction-radiation problems: a boundary element formulation Verformungs- und Dehnungsfeldermittlung an zellularen Werkstoffen mittels Rasterverfahren
	1998 A Framework for Geometrically Nonlinear Continuum Damage Mechanics A Model Adaptive Strategy to Capture Strong Discontinuities at Large Inelastic Strains A Model Adaptive Strategy to Capture Strong Discontinuities at Large Inelastic Strains Aspects of Non-Associated Single Crystal Plasticity: Influence of Non-Schmid Effects and Localization Analysis Aspects of the Motivation and the Formulation of Higher Gradient Plasticity for Single and Polycrystals Aspects of the Motivation and the Formulation of Higher Gradient Plasticity for Single and Polycrystals Biomechanik - eine Herausforderung Contact Description by FEM Based on Interface Physics Dual reciprocity boundary element method for convective-diffusive solid-liquid phase change problems, Part 1, Formulation Dual reciprocity boundary element method for convective-diffusive solid-liquid phase change problems, Part 2, Numerical examples Elasto-plastic contact of rough surfaces Hierarchical Modeling in Multibody Dynamics Iterative solution of large scale 3D BEM industrial problems Knochenfestigkeit und Materialversagen aus werkstoffmechanischer Sicht Localization and Failure Analysis of Fluid Saturated Cohesive and Granular Soils Lokalisierungsphänomene inelastischer Deformationen - Theorie und Numerik Mechanics of Bones On Applying Fuzzy Arithmetic to Finite Element Problems On the Formulation of Higher Gradient Single and Polycrystal Plasticity On the Formulation of Higher Gradient Single and Polycrystal Plasticity Strong Discontinuities within Fluidsaturated Porous Media Theory and Numerics of Higher Gradient Softening Materials at Large Strains Werkstoffmechanik von Knochenfestigkeit und Schädigung Zur Formulierung und Numerik der Statik und Dynamik von Schalen bei endlichen Deformationen Zur Theorie und Numerik entfestigender Materialien vom höheren Gradiententyp bei großen Verzerrungen
	1997 A Unifying Treatise of Variational Principles for Two Types of Micropolar Continua Aspekte der duktilen Monokristallplastizität und der Kontinuumstheorie der Versetzungen Aspekte der Modellierung und Numerik flüssigkeitsgefüllter poröser Medien Contact Description by FEM Based on Interface Physics Contact description by FEM based on interface physics Continuum Theory of Dislocations: Impact to Single Crystal Plasticity Continuum Theory of Dislocations: Impact to Single Crystal Plasticity Diskontinuierliches Versagen in porösen Medien - Theorie und Numerik Elasto-Plastic Contact of Rough Surfaces Elasto-plastic contact of rough surfaces Enhanced FE Formulation for Geometrically Linear Fluidsaturated Media FE Plane Stress Analysis Incorporating Arbitrary 3D Large Strain Constitutive Models Higher Gradient Single Crystal Plasticity and the Continuum Theory of Dislocations Higher Gradient Single Crystal Plasticity Based on the Continuum Theory of Dislocations Higher Gradient Single Crystal Plasticity Based on the Continuum Theory of Dislocations Instability Issues in Single Crystal Plasticity: Theory and Computational Analysis Instability Issues in Single Crystal Plasticity: Theory and Computational Analysis Issues of the Localization Analysis in Large Strain Elastoplasticity Lokalisierung inelastischer Deformationen: Theoretische und Numerische Aspekte Modellierung und Numerik duktiler kristalliner Werkstoffe Numerische Simulation des mechanischen Verhaltens von trabekulärem Knochen mit Voronoi-Zellen und Balkenelementen On the Analysis of Adiabatic Strong Discontinuities within Thermoplastic Solids On the Analysis of Adiabatic Strong Discontinuities within Thermoplastic Solids On the Localization Properties of Multiplicative Hyperelasto-Plastic Continua with Strong Discontinuities Sampling Density Determination at Ductile Evaluation in Aluminium Alloys Theoretical and Numerical Localization Analysis of Fluid Saturated Porous Media Using the ESPI-Technique to Determine Material Properties of Plates Wellenausbreitung in einem Lithotripter
	1996 A statistical approach to contact modelling Aspects of Localization Analysis in Multisurface Elasto-Plasticity Aspects of the Localization Analysis in Computational Plasticity Aspekte der Schädigungstheorie im Rahmen der geometrisch nichtlinearen Kontinuumsmechanik Berechnung einer Schraube für ein Zahnimplantat Bestimmung von Materialdaten aus Eigenschwingungen am Beispiel der orthotropen Rechteckplatte Eine Finite Element Formulierung zur Berechnung ebener Spannungsprobleme bei beliebigen 3d Stoffgesetzen Fast Transient Dynamic Plane Stress Analysis of Orthotropic Hill-Type Solids at Finite Elastoplastic Strains Flüssigkeitsgefüllte poröse Medien: Aspekte der Modellierung und Numerik Interactive Modeling of Multibody Systems with an Object Oriented Data Model Knochenfestigkeit und hydrostatische Spannungen Knochenfestigkeit und kontinuierliche Schädigung.- Stoffgesetz - FE-Modellierung - Experimente - Localization Analysis in Multisurface Elasto-Plasticity Localization Issues in Large Strain Single Crystal Plasticity: Theory and Computational Analysis Modelling and Computation of Instability Phenomena in Multisurface Elasto-Plasticity On Localization Analysis in Multisurface Hyperelasto-Plasticity On the Numerical Treatment and Analysis of Finite Deformation Ductile Single Crystal Plasticity Theoretical & Numerical Aspects of Ductile Single Crystal Plasticity & Continuum Dislocations Views on Multiplicative Elastoplasticity and the Continuum Theory of Dislocations Zur Optimierung von Mehrkörpersystemen
	1995 A Penalty Approach for Contact Description by FEM Based on Interface Physics A penalty approach for contact description by FEM based on interface physics Computational Analysis of Localization Instabilities in Single Crystal Plasticity Computational Modelling of Ductile Single Crystals Computational Modelling of Instability Phenomena in Plasticity Deformation Instabilities at Finite Inelastic Strains Ein Finite Element Modell zur Analyse des dynamischen Kontaktverhaltens metallischer Körper Ein natürliches Penalty-Verfahren auf der Basis eines statistischen Kontaktmodells Ein statistisches Modell für den Kontakt metallischer Körper Ein statistisches Modell für den Kontakt metallischer Körper Instability Phenomena in plasticity: Modelling and Computation Lokalisierungsanalyse orthotroper elastoplastischer Materialien Modellierung und Lokalisierungsanalyse duktiler Materialien bei endlichen inelastischen Verzerrungen Numerical Analysis of Localization Phenomena in Single Crystal Plasticity Numerical Analysis of Localization Phenomena in Single Crystal Plasticity Numerical Plane Strain and Plane Stress Analysis of Ductile Single Crystals. Special Issue `Mathematical Modelling and Computational Aspects of Materials Behavior' Numerische Lokalisierungsanalyse bei duktiler Monokristallplastizität On a Mixed Finite Element Formulation Involving Large Rotations for Geometrically Nonlinear Elasticity Schädigung und Lokalisierung duktiler Werkstoffe Shearband Localization and Instability Phenomena in Crystal Plasticity Shearband Localization and Instability Phenomena in Crystal Plasticity Theory and Numerics of Ductile Micropolar Elastoplastic Damage
	1994 A Micropolar Theory of Finite Deformation and Finite Rotation Multiplicative Elastoplasticity An Implicit Integration Algorithm for Finite Deformation Single Crystal Plasticity An Improved FE Expansion for Micropolar Localization Analysis Analyse der Lokalisierungseigenschaften orthotroper Elastoplastizität Comparison of Different Finite Deformation Inelastic Damage Models within Multiplicative Elastoplasticity for Ductile Materials Ein Spannungsintegrationsalgorithmus der Einkristallplastizität Ein voll-impliziter Spannungsalgorithmus für duktile Einkristalle und seine Anwendung in Lokalisierungsberechnungen Finite Element Analysis of Elastoplastic Discontinuities Finite Element Localization Analysis of Micropolar Strength Degrading Materials Finite Element Localization Analysis of Micropolar Strength Degrading Materials Localization Analysis of an Orthotropic Loading Function within Elastoplasticity and Elastoviscoplasticity Localization Phenomena in Plastic Flow Processes of Ductile Materials Nonlinear Vibration Damping of Structures with Bolted Joints On the Localization Analysis of Orthotropic Hill Type Elastoplastic Solids Rail Vibrations in the High Frequency Range Strukturphänomene bei der Biegung mit Stoffmodellen der kontinuierlichen Schädigung. Theorie Endlicher Mikropolarer Elasto-Plastizität
	1993 Analyse der Lokalisierungseigenschaften eines orthotropen elastoplastischen Materialmodells Endliche inelastische Deformationen mikropolarer Kontinua Finite Element Discretization of Spatial Discontinuities Due to Localization Localization Problems in Plasto-Mechanics Lokalisierungsprobleme in der Plastomechanik Micropolar Elasto-Plasticity and its Role in Localization Analysis Schädigungsmechanik und biomechanische Festigkeit des Femur Theoretische und Numerische Aspekte Endlicher Elasto-Plastischer Deformationen
	1992 Adaptive Techniques for Localization Analysis Adaptive Techniques for Localization Analysis Analyzing and Optimizing Multibody Systems Aspekte endlicher inelastischer Deformationen in lokalisierten Versagensberechnungen Distributed Failure Analysis, Fallacies and Remedies Finite Inelastic Deformations based on Logarithmic Strains - Theory and Computations Influence of microslip on the damping of joints Localization Analysis in Finite Deformation Elasto-Plasticity Lokalisierungsprobleme in der Plasto-Mechanik Rail vibrations in the high frequency range Theoretische und numerische Beiträge zum lokalisierten Versagen in der Plasto-Mechanik Vibrations in the High Frequency Range
	1991 Computational Aspects of Localized Failure Simulations in Plain Concrete Conditions for Localized Failure in Micropolar Elasto-Plasticity Ein Finite-Elemente-Verfahren zur Untersuchung der Wellenausbreitung in unendlich langen Trägern Finite Elements for Capturing Localized Failure Localization Analysis in Finite Deformation Elasto-Plasticity Localization in Micropolar Elasto-Plasticity Localization in Micropolar Elasto-Plasticity Lokalisierung als Verzweigungsproblem auf konstitutiver Ebene und bei der Berechnung diskretisierter RWP Performance of Enhanced Finite Element Formulations in Localized Failure Computations Strategien zur Erfassung lokalisierten Versagens in FE-Berechnungen
	1990 Computational Failure Mechanics : State-of-the Art and Future Trends Erfassung von diffusem und lokalisiertem Versagen in elastoplastischen Materialien im Rahmen der FE-Methode Finite Element Performance during Progressive Failure Computations Lokalisiertes Versagen im Rahmen von elastoplastischen Stoffgesetzen Lokalisierung von Versagensvorgängen in Finiten Elementen Mechanische Aspekte bei der Entwicklung künstlicher Herzklappen
	1989 Finite Elements for Capturing Localized Failure



	UnivIS ist ein Produkt der Config eG, Buckenhof